Quality Engineer III

Company : Safran Electrical & Power

Job field : Quality

Location : Twinsburg , Ohio , United States

Contract type : Permanent

Contract duration : Full-time

Required degree : Associate Degree

Required experience : More than 5 years

Salary range : n/a

# 2024-140545

Apply with one click Any questions ?

Job Description

Location: Twinsburg

A DMIR is an individual appointed in accordance with 14 CFR §183.31. A DMIR conducts conformity inspections during the manufacturing process. DMIRs also issue certificates such as airworthiness certificates for aircraft, export certificates for aircraft and parts, and special flight permits. A DMIR must possess aeronautical knowledge and experience, be employed by a Production Approval Holder (PAH), or a PAH's approved supplier, and meet the qualification requirements of Order 8000.95.

Essential Duties and Responsibilities:

•As an FAA Designated Manufacturing Inspection Representative, (DMIR), will issue 8130-3 Airworthiness Certificates for Spares, MRO and OE units.

•Source Inspect and release Spares and OE Units and components under the applicable company delegations.

•Perform Customer Delegated Source Inspections as assigned.

•Representative responsibilities include review of product and documentation, dimensional inspection of sampled characteristics, generate source inspection records and documentation required to ship the product.

•Documents data obtained during all source inspection activities, consistent with company and customers policies and procedures.

•Maintains a working knowledge of government and Customer quality assurance codes and standards.

•Position requires accuracy and thoroughness; continually looking for ways to improve and promote quality; applying feedback to improve performance; and continual monitor or own work to ensure quality.

•Inspects mechanical and electrical parts, components, sub-assemblies and final assemblies during the in process, and final inspections.

•Generates and files the necessary inspection data sheets and documentation for recording and reporting of inspection results.

•Performs visual soldering inspection per requirements of governing standards.

•Responsible for identification, documentation, and securing of nonconforming parts, components, sub-assemblies and final assemblies & submissions to the Material Review Board (MRB) for disposition.

•Review and approval of First Article Inspection (FAI) reports in accordance with the applicable procedures and SAE AS9102.

•Works effectively with all internal departments, customers, and Regulatory Agencies to exceed internal and external expectations for customer satisfaction.

•Provides inspection feedback to suppliers and other departments to improve quality.

•Assures compliance to Internal, Customer, Statutory, and Regulatory Agency (FAA, EASA, ITAR, etc...) policies/procedures/regulations.

•Assist with root cause analysis and implementation of corrective actions (RCCA/CAPA)

•Provide guidance to entire Quality team in relation to how to perform Releases.

•Demonstrated experience in a team environment, balancing team and individual responsibilities

•Other duties and responsibilities as assigned.

•Travel requirements: Occasional travel up to 5% (general guideline: once per year) within U.S/Outside U.S.

Complementary Description

•Other duties may be assigned.

•Evening/night hours may be required.

• Extra hours may be required during business peak.

Physical Demands:

•Office environment with moderate noise levels.

•Occasional need to be on shop floor, requiring safety glasses, safety shoes, and ability to stand for long periods.

Work Environment:

•The noise level in the work environment could be unusually loud at times (hearing protection will be provided).

This description has been designed to indicate the general nature & level of work performed by an employee within this position. The actual duties, responsibilities & qualifications may vary based on assignment or group. All qualified applicants will receive consideration for employment without regard to race, color, age, ethnicity, religion, sex, sexual orientation, gender identify, national origin, disability, veteran status, genetic data, or other legally protected status. Safran Electrical & Power is committed to working with & providing reasonable accommodation to individuals with physical & mental disabilities. To verify the information in the job listing or if you need special assistance or an accommodation while seeking employment, please call 330-487-2000. We will decide on your request for reasonable accommodation on a case-by-case basis.

Job Requirements

Education and/or Experience:

•Associates Degree in a related field preferred; BS degree a plus.

•Must possess a minimum of 5 years' experience in FAA certification of aircraft systems and equipment installations

•Inspection experience for electrical and mechanical components.

•Prior FAA DMIR and/or Delegated Manufacturing Inspection Representative preferred;

•Ability to read, analyze and interpret blueprints, drawings and technical information.

•Proficient with geometric dimensioning and tolerancing.

•Capable of achieving necessary delegations from customers, FAA and other regulatory bodies.

•Applicant must have documented knowledge of the following:

•Use of FAA-approved type design data.

•First article, in-process, and final assembly inspections.

•Quality assurance provisions of special processes (e.g., heat treating, brazing, welding, carbonizing, and plating).

•Destructive and nondestructive inspections.

•Manufacturing processes.

•Airworthiness assurance.

•Development and implementation of quality control systems and procedures.

•Review and Approval of Testing procedures.

This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.

Preferred Experience

•Solder certification to IPC J-STD-001 and IPC-A-610D.

•Working knowledge of SAP.

•Working knowledge and experience with ISO9001/AS9100 manufacturing environment.

•Continuous Improvement and 5S activities.

•Knowledge of the associated PPAP tools such as PFMEA, Control Plans, Characteristic Matrix, Gage Capability, Process Capability, and Process Flow.

•Proficient in utilization of mechanical inspection equipment including: Calipers, micrometers, Height gauges, Go/no-go gauges, Coordinated Measuring Machines Other inspection measurement tools

•Possesses working knowledge and experience in: reading, interpreting, and following engineering blue prints, process specifications, policies, procedures, and work instructions.

•Must be proficient in using Microsoft Office (Word, Excel, Outlook, and Access).

Specificity of the job

Travel requirements: Occasional travel up to 5% (general guideline: once per year) within U.S/Outside U.S.

Locate your future workplace

8380 Darrow Rd44087

Twinsburg

Ohio United States

Copy Address

Safran is an Equal Opportunity Employer

All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status.